0.5 - 1.0 % of Bacta dehair C (liq) based on row weight is used during liming. It is advisable to add microdep C liquid along with lime sulfide and unhairing assist TA and run the paddle. 10 min every hour for two hours & turn continue with the normal liming. The quantity of sodium sulfide used in liming can be reduced proportionally and can be evaluated by actual control of the liming operation. In paste liming microped c liquid should be mix with the unhairing paste.

Bacta dehair C liquid is more ideal for paste liming as they will not bring down the temperature of the paste and keeps the pield skins warmer to help the hair remover easier than micro dep powder.

This can reduce pollution up to 50% through replacing sodium sulphide. Same can do increment in area in the final leather. It can do removal of stains & pigments to achieve a uniform color in wet blue. And it can have better absorption and distribution or chronic at the later stages of chrome tuning there by increase in tensile strength and better depth in dyeing.

Bacta dehair C liquid gives maximum efficiency at 30 degree - 35 degree C. It has broad pH range as round in all tanneries. It contains 6.5 to 7.5 pH at 10% solution. by non pathogenic

Bacta dehair C liquid etc readily mix with all solutions at all levels of concentration, temperature & pH which may occur in normal usage.

Bacta dehair C liquid is produced micro Organism and is classified as nontoxic. Bactagent reparations are Biogradable.

We strongly suggest that it should be stored in cool and dry place. If the enzyme will keep under 25 degree C the same can keep its declared activity more than six months.

Notwithstanding the fact, there is no need for our technical advice to the users, we are willing to give further assistance if any body required the details.